skip to Main Content

Bifilar Coils

Rated 0 out of 5
(be the first to review)

Designed as both Magnetic Wave and High Power Magnetic Pulse delivery devices.
Designed to Work With BioZap V2.0 Rife System.

Coils are used to generate complex magnetic waves, scalar or longitudinal waves, and extremely strong magnetic pulses. These coils were developed to generate powerfull field effects.
As a Rife delivery device these coils are non-contact magnetic field generators when used with a frequency source. A single coil lays down a circular magnetic wave front, radiating outward from the coil face and can be measured with a meter like the Trifield 100XE meter. unamplified 3000 Hz signwave delivers 100 milligauze at 8 inches. The Trifield maximum scale reading is 100 milligauze. When using an amplifier with the BioZap V2.0, pegging the meter at 2 feet is easily accomplished. This range can be further extended when two synchronized coils are placed out of phase so the north and south fields pull at one another.
When operated in the ‘Scalar Mode’ Setting in BioZap V2.0 Software on a two channel, the BIFILAR Coil can produce very intense opposing waves resulting in a standing wave. Thus the BIFILAR Coil is a powerful scalar wave delivery device. With a ‘Polarity Reverser’, even stronger standing waves can be generated.

Description

Highlights:
Designed as both Magnetic Wave and High Power Magnetic Pulse delivery devices.
Designed to Work With BioZap V2.0 Rife System.
Description:
Coils are used to generate complex magnetic waves, scalar or longitudinal waves, and extremely strong magnetic pulses. These coils were developed to generate powerfull field effects.
As a Rife delivery device these coils are non-contact magnetic field generators when used with a frequency source. A single coil lays down a circular magnetic wave front, radiating outward from the coil face and can be measured with a meter like the Trifield 100XE meter. unamplified 3000 Hz signwave delivers 100 milligauze at 8 inches. The Trifield maximum scale reading is 100 milligauze. When using an amplifier with the BioZap V2.0, pegging the meter at 2 feet is easily accomplished. This range can be further extended when two synchronized coils are placed out of phase so the north and south fields pull at one another.
When operated in the ‘Scalar Mode’ Setting in BioZap V2.0 Software on a two channel, the BIFILAR Coil can produce very intense opposing waves resulting in a standing wave. Thus the BIFILAR Coil is a powerful scalar wave delivery device. With a ‘Polarity Reverser’, even stronger standing waves can be generated.
Coil Considerations:
Both Coils RUN / WORK with Biozap. Electric fields are replaced with magnetic fields and in many cases can be more effective than electric fields. Scaler waves are generated in the same way the Biozap Remote Adapter generate scalar wave when employing a BIFILAR Coil. Finger nail clippings to an arm or leg can be placed in the 6.5” diameter coil core center. All infrared, ultraviolet, and LED protocols can be run using magnetic waves verse the light waves. Magnetic waves can run along side or replace all other wave types.
The Coils are tightly wrapped with PVC tape to help eliminate wire vibration. There is a 330 ohm resistor placed in each leg of the coil adapter cable to allow direct connection to the function generator outputs. The resistors are in the RCA phono to AC plug adapters cables. When using the coil as a PEMF delivery device it will barely get warm with a PEMF Bob Beck Style unit. With the High Powered PEMF the coil get comfortably warm after 10 minutes of use, to mildly hot after 20 to 30 minutes use. Depending how the coil is connected, series or parallel connections, will change the ohmic and inductance values.

Reviews

There are no reviews yet.

Be the first to review “Bifilar Coils”

Your email address will not be published. Required fields are marked *

Back To Top